Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Receiver
Overview
- 1000' Line-of-Sight Range
- Supports up to 1080p60 Resolution
- Backwards Compatible with Select Systems
- 3G-SDI & HDMI Output
- Zero Wireless Delay
- 2.4 & 5.8 GHz Noise Rejection
- AES128 Encryption
- OLED Status Screen
- 3D LUT, 5G Spectrum Analyzer
Features
With the Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Receiver you can receive visually lossless 3G-video or HDMI signals from a Bolt 1000 transmitter with zero latency. The Bolt XT is compatible with the Sidekick II, and 703 Bolt, as well as the Bolt LT. The receiver unit itself can be secured via built-in 1/4"-20 or M3 threaded holes.
A lightstand adapter is included for mounting on stands. For convenience, a standard HDMI cable is included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector. A D-Tap power cable is included for attaching to a battery. The receiver can share the transmitter with up to three other receivers. It features built-in AES 128 encryption that protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals. The receiver features a built-in 3D LUT engine and a 5 GHz spectrum analyzer so you can find a clean signal path.
- Backwards compatible with Bolt 1000 LT, Sidekick II, and 703 Bolt
- The receiver includes built-in cross conversion and Teradek's proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5 GHz spectrum analyzer to help you find a clean signal pathway.
- SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.
- OLED Screen with Menu Joystick Navigation.
- 1/4"-20 and M3 mounting points
- 5 included antennas for the receiver enable it to pick up signals with clarity
UPC: 818264023327
Specifications
| Bolt XT 1000 SDI/HDMI Wireless TX | |
| Video- | |
| Video Inputs | 1 x SD/HD/3G-SDI (75 Ohm BNC) |
| 1 x Type A receptacle HDMI | |
| Video Outputs | 1 x HD/SD/3G-SDI Loop-out (75 Ohm BNC) |
| Sdi Ancillary Data Support | supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to: |
| https://support.teradek.com/hc/en-us/articles/217446087 | |
| Colour Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) |
| HDMI: RGB 4:4:4, 8-bit | |
| Delay Tx To Rx | <0.001sec (without format conversion) |
| Supported Resolutions- | |
| Supported Resolution | 1080p 23.98/24/25/29.97/30/50/59.94/60 |
| 1080psf23.98/24/25/29.97/30 | |
| 1080i50/59.94/60 | |
| 720p50/59.94/60 | |
| 480p59.94/576p50 (via HDMI ports only) | |
| 480i(NTSC)/576i(PAL) | |
| Video Processing- | |
| Video Compression | Visually lossless |
| Colour Correction | CDL/1024 1D LUT (supports 10-bit color) |
| 33x33x33 3D LUT (supports 10-bit color) | |
| Audio Processing- | |
| Audio Compression | 48kHz 24-bit PCM |
| Inputs- | |
| Audio Input | Embedded Audio Input |
| Physical- | |
| Dimensions | 24mm x 66mm x 101.5mm |
| 0.95" x 2.6" x 4.47" | |
| Weight | 226g |
| 8oz | |
| Construction | Milled Aluminum(Chassis) and regulation-compliant PCB |
| Mountability | Multiple mounting options with M3 and 1/4" holes |
| 3/8" ARRI style accessory mount | |
| Interfaces | |
| Http | None |
| Configuration Interfaces | None |
| Switches | On/Off and Reset Switch |
| Desktop App | Feature-rich Bolt Manager Application for OSX & Windows |
| USB Interface Functionality | Upgrade via Mini-USB |
| Network- | |
| Wireless | Non-DFS Frequencies: |
| US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz | |
| EU & JP: 5.19 ~ 5.23 GHz | |
| DFS Frequencies: | |
| US: 5.27 ~ 5.55 GHz and 5.67 GHz | |
| EU & JP: 5.27 ~ 5.67 GHz | |
| Rf Channel Selection | Auto and Configurable Channel Selection |
| Encryption | AES-128 |
| Rf Power | 17 dbm EIRP (with one 2 dbi TX antenna) |
| Range | Up to 1000 ft line of sight |
| Unicast Multicast | Unicast/Multicast |
| Noise Rejection | Can coexist with WiFi and 5GHz cordless phones |
| Power- | |
| Power Input | 2-Pin Connector 7-28 VDC |
| Battery | None |
| Nominal Power Consumption | 7.5 Watts (Measured at 1080p60) |
| Environmental- | |
| Operating Temperature | 0 ~ 40 deg-C |
| Bolt XT 1000 SDI/HDMI Wireless RX | |
| Video- | |
| Video Outputs | 1 x SD/HD/3G-SDI (75 Ohm BNC) |
| 1 x HDMI Type-A receptacle | |
| 1 x USB 3.0 micro B receptacle | |
| Sdi Ancillary Data Support | supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to: |
| https://support.teradek.com/hc/en-us/articles/217446087 | |
| Colour Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) |
| HDMI: RGB 4:4:4, 8-bit | |
| Delay Tx To Rx | <0.001sec (without format conversion) |
| Supported Resolutions- | |
| Supported Resolution | 1080p 23.98/24/25/29.97/30/50/59.94/60 |
| 1080psf23.98/24/25/29.97/30 | |
| 1080i50/59.94/60 | |
| 720p50/59.94/60 | |
| 480p59.94/576p50 (via HDMI ports only) | |
| 480i(NTSC)/576i(PAL) | |
| Video Processing- | |
| Video Compression | Visually lossless |
| Test Pattern Generator Support | Yes |
| Colour Correction | CDL/1024 1D LUT (supports 10-bit colour) |
| 33x33x33 3D LUT (supports 10-bit colour) | |
| Audio Processing- | |
| Audio Compression | 48kHz 24-bit PCM |
| Inputs- | |
| Audio Input | Embedded Audio Input |
| Physical- | |
| Dimensions | 89 x 138 x 24mm |
| 3.5" x 5.4" x .95" | |
| Weight | 376g |
| 13.3oz | |
| Construction | Milled Aluminum(Chassis) and regulation-compliant PCB |
| Mountability | Multiple mounting options with M3 and 1/4" holes |
| Interfaces | |
| Http | None |
| Configuration Interfaces | OLED Screen with Menu Joystick Navigation |
| Switches | On/Off and Reset Switch |
| Desktop App | Feature-rich Bolt Manager Application for OSX & Windows |
| USB Interface Functionality | Upgrade via Mini-USB |
| Network- | |
| Wireless | Non-DFS Frequencies: |
| US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz | |
| EU & JP: 5.19 ~ 5.23 GHz | |
| DFS Frequencies: | |
| US: 5.27 ~ 5.55 GHz and 5.67 GHz | |
| EU & JP: 5.27 ~ 5.67 GHz | |
| Rf Channel Selection | Auto and Configurable Channel Selection |
| Encryption | AES-128 |
| Rf Power | 17 dbm EIRP (with one 2 dbi TX antenna) |
| Range | Up to 1000 ft line of sight |
| Unicast Multicast | Unicast/Multicast |
| Noise Rejection | Can coexist with WiFi and 5GHz cordless phones |
| Power- | |
| Power Input | 2-Pin Connector 7-28 VDC |
| Battery | None |
| Nominal Power Consumption | 8.5 Watts (Measured at 1080p60) |
| Environmental- | |
| Operating Temperature | 0 ~ 40 deg-C |