





Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter
Overview
- Up to 1000' Range Line-of-Sight
- Supports up to 1080p60 Resolution
- Backwards Compatible with Select Systems
- 3G-SDI & HDMI Input, 3G-SDI Loop Out
- Zero Delay
- 2 x Antennas
- 5 GHz Spectrum Analyzer
- 2.4 & 5.8 GHz Noise Rejection
- AES128 Encryption
- Transmits to up to 4 Receivers
Features
With the Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 1000 receiver with zero latency. The Bolt XT is compatible with existing 3rd-generation Bolt systems, such as the Bolt 1000, Sidekick II, and 703 Bolt, as well as the Bolt 1000 LT. The transmitter unit itself can be secured to a camera or other SDI/HDMI video source via a built-in 1/4"-20 threaded hole, two M3 threaded holes, and a built-in 3/8"-16 ARRI accessory mount. The included antennas provide a powerful signal that can travel up to 1000' line-of-sight.
A shoe mount is included for attaching to cameras without 1/4"-20 threads. For convenience, both a standard BNC cable and HDMI cable are included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers, built-in AES 128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.
- Compatible with Bolt 1000 XT and LT, Sidekick II, and 703 Bolt
- HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter
- 5 GHz Spectrum Analyzer
- Manual channel selection
- Supports 11 channels in the 40 MHz band
- SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.
- 1/4"-20 and M3 mounting points
Specifications
Bolt XT 1000 SDI/HDMI Wireless TX | |
Video- | |
Video Inputs | 1 x SD/HD/3G-SDI (75 Ohm BNC) |
1 x Type A receptacle HDMI | |
Video Outputs | 1 x HD/SD/3G-SDI Loop-out (75 Ohm BNC) |
Sdi Ancillary Data Support | supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to: |
https://support.teradek.com/hc/en-us/articles/217446087 | |
Colour Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) |
HDMI: RGB 4:4:4, 8-bit | |
Delay Tx To Rx | <0.001sec (without format conversion) |
Supported Resolutions- | |
Supported Resolution | 1080p 23.98/24/25/29.97/30/50/59.94/60 |
1080psf23.98/24/25/29.97/30 | |
1080i50/59.94/60 | |
720p50/59.94/60 | |
480p59.94/576p50 (via HDMI ports only) | |
480i(NTSC)/576i(PAL) | |
Video Processing- | |
Video Compression | Visually lossless |
Colour Correction | CDL/1024 1D LUT (supports 10-bit color) |
33x33x33 3D LUT (supports 10-bit color) | |
Audio Processing- | |
Audio Compression | 48kHz 24-bit PCM |
Inputs- | |
Audio Input | Embedded Audio Input |
Physical- | |
Dimensions | 24mm x 66mm x 101.5mm |
0.95" x 2.6" x 4.47" | |
Weight | 226g |
8oz | |
Construction | Milled Aluminum(Chassis) and regulation-compliant PCB |
Mountability | Multiple mounting options with M3 and 1/4" holes |
3/8" ARRI style accessory mount | |
Interfaces | |
Http | None |
Configuration Interfaces | None |
Switches | On/Off and Reset Switch |
Desktop App | Feature-rich Bolt Manager Application for OSX & Windows |
USB Interface Functionality | Upgrade via Mini-USB |
Network- | |
Wireless | Non-DFS Frequencies: |
US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz | |
EU & JP: 5.19 ~ 5.23 GHz | |
DFS Frequencies: | |
US: 5.27 ~ 5.55 GHz and 5.67 GHz | |
EU & JP: 5.27 ~ 5.67 GHz | |
Rf Channel Selection | Auto and Configurable Channel Selection |
Encryption | AES-128 |
Rf Power | 17 dbm EIRP (with one 2 dbi TX antenna) |
Range | Up to 1000 ft line of sight |
Unicast Multicast | Unicast/Multicast |
Noise Rejection | Can coexist with WiFi and 5GHz cordless phones |
Power- | |
Power Input | 2-Pin Connector 7-28 VDC |
Battery | None |
Nominal Power Consumption | 7.5 Watts (Measured at 1080p60) |
Environmental- | |
Operating Temperature | 0 ~ 40 deg-C |
Bolt XT 1000 SDI/HDMI Wireless RX | |
Video- | |
Video Outputs | 1 x SD/HD/3G-SDI (75 Ohm BNC) |
1 x HDMI Type-A receptacle | |
1 x USB 3.0 micro B receptacle | |
Sdi Ancillary Data Support | supports metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to: |
https://support.teradek.com/hc/en-us/articles/217446087 | |
Colour Sampling | SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled) |
HDMI: RGB 4:4:4, 8-bit | |
Delay Tx To Rx | <0.001sec (without format conversion) |
Supported Resolutions- | |
Supported Resolution | 1080p 23.98/24/25/29.97/30/50/59.94/60 |
1080psf23.98/24/25/29.97/30 | |
1080i50/59.94/60 | |
720p50/59.94/60 | |
480p59.94/576p50 (via HDMI ports only) | |
480i(NTSC)/576i(PAL) | |
Video Processing- | |
Video Compression | Visually lossless |
Test Pattern Generator Support | Yes |
Colour Correction | CDL/1024 1D LUT (supports 10-bit colour) |
33x33x33 3D LUT (supports 10-bit colour) | |
Audio Processing- | |
Audio Compression | 48kHz 24-bit PCM |
Inputs- | |
Audio Input | Embedded Audio Input |
Physical- | |
Dimensions | 89 x 138 x 24mm |
3.5" x 5.4" x .95" | |
Weight | 376g |
13.3oz | |
Construction | Milled Aluminum(Chassis) and regulation-compliant PCB |
Mountability | Multiple mounting options with M3 and 1/4" holes |
Interfaces | |
Http | None |
Configuration Interfaces | OLED Screen with Menu Joystick Navigation |
Switches | On/Off and Reset Switch |
Desktop App | Feature-rich Bolt Manager Application for OSX & Windows |
USB Interface Functionality | Upgrade via Mini-USB |
Network- | |
Wireless | Non-DFS Frequencies: |
US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz | |
EU & JP: 5.19 ~ 5.23 GHz | |
DFS Frequencies: | |
US: 5.27 ~ 5.55 GHz and 5.67 GHz | |
EU & JP: 5.27 ~ 5.67 GHz | |
Rf Channel Selection | Auto and Configurable Channel Selection |
Encryption | AES-128 |
Rf Power | 17 dbm EIRP (with one 2 dbi TX antenna) |
Range | Up to 1000 ft line of sight |
Unicast Multicast | Unicast/Multicast |
Noise Rejection | Can coexist with WiFi and 5GHz cordless phones |
Power- | |
Power Input | 2-Pin Connector 7-28 VDC |
Battery | None |
Nominal Power Consumption | 8.5 Watts (Measured at 1080p60) |
Environmental- | |
Operating Temperature | 0 ~ 40 deg-C |