Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set

Product type: wireless

Vendor: Teradek

Availability:

€8,940.00

Add to the wishlist

Overview

 

  • Up to 3000' Range Line of Sight
  • Supports up to 1080p60 Resolution
  • Backwards Compatible with Select Systems
  • 3G-SDI & HDMI Inputs/Outputs
  • Cross Conversion
  • Zero Delay
  • 2.4 & 5.8 GHz Noise Rejection
  • AES128 Encryption

         

        Features

         

        The Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero latency transmitter receiver pair features 3000' line-of-sight transmission distance when used together. You can send and receive visually lossless 3G-video signals from a Bolt 3000 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor.

        The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals, in both 50 and 60 Hz standards, as well as 480i and 576i. However, 480p and 576p are only supported via HDMI. You can transmit up to three other receiver models such as Bolt 3000 XT, Sidekick II, or 703 Bolt 703, and the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps to keep your transmitted video safe from prying eyes.

        • Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter

          With the Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 3000 receiver with zero latency. The Bolt XT is also compatible with the Sidekick II and 703 Bolt. The transmitter unit itself can be secured to a camera or other SDI/HDMI video source via a built-in 1/4"-20 threaded hole, as well as two M3 threaded holes. The included antennas provide a powerful signal that can travel up to 3000' line-of-sight.

          A shoe mount is included for attaching to cameras without 1/4"-20 threads. For convenience, both a standard BNC cable and HDMI cable are included so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers and built-in AES 128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.

          Backwards compatible with the Teradek universal receivers the Sidekick II and 703 Bolt, which can receive Bolt 3000 XT signals up to 300' away
          HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter
          SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers
          1/4"-20 and M3 mounting points
        • Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver

          With the Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver you can receive visually lossless 3G-video or HDMI signals from a Bolt 3000 transmitter with zero latency. The receiver unit itself can be secured via built-in 3/8"-16 M3 threaded holes or the built-in NATO rail.

          A lightstand adapter is included for mounting on stands. For convenience, a standard HDMI cable is included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector. A D-Tap power cable is included for attaching to a battery. The receiver can share the transmitter with up to three other receivers. It features built-in AES 128 encryption that protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.

          The receiver includes built-in cross conversion and Teradek's proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5 GHz spectrum analyzer to keep an eye on interference in your area.
          The receiver features an HDMI output as well as dual 3G-SDI outputs.
          An integrated NATO rail on the receiver, along with several M3 mounting points, and an ARRI compatible 3/8"-16 threaded hole with locating pin holes provide for multiple mounting options.
          SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.
          5 included antennas for the receiver enable it to pick up signals with clarity
           UPC: 818264023440
         

        Specifications

        • Transmitter
          Construction Milled aluminum (chassis) and regulation-compliant PCB
          Video Inputs SDI: 1 x BNC (75 Ohm), 3G/HD/SD
          HDMI: 1 x HDMI type A receptacle
          Video Outputs SDI: 1 x BNC (75 Ohm), 3G/HD/SD, loop through
          Color Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
          HDMI: RGB 4:4:4, 8-bit
          Latency <0.001 seconds (Tx to Rx without format conversion)
          Supported Resolutions 1080p: 60/59.94/50/30/29.97/25/24/23.98
          1080PsF: 30/29.97/25/24/23.98
          1080i: 60/59.94/50
          720p: 60/59.94/50
          480i: 59.94
          576i: 50
          Video Processing Compression
          Visually lossless

          Color Correction
          CDL/1024 1D LUT (supports 10-bit color)
          33x33x33 3D LUT (supports 10-bit color)
          Audio Compression 48 kHz, 24-bit PCM
          Audio Input Embedded
          Interfaces Switches: On/Off and Reset
          Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows
          USB Interface Functionality: Upgrade via mini-USB
          Wireless Non-DFS Frequencies
        • UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
        • EU & JP: 5.19 to 5.23 GHz

        • DFS Frequencies
        • US: 5.27 to 5.55 GHz and 5.67 GHz
        • EU & JP: 5.27 to 5.67 GHz
        • RF Power 17 dBm EIRP
          Encryption AES-128
          Range Up to 500' / 152.4 m line of sight
          Unicast Multicast Unicast / Multicast
          Noise Rejection Can coexist with WiFi and 5 GHz cordless phones
          Power Input 2-pin connector
          7 to 17 VDC
          Power Consumption Nominal 7.3 W (measured at 1080p60)
          Operating Temperature 32 to 104°F / 0 to 40°C
          Mountable 1 x 1/4"-20 threaded mounting hole
          2 x M3 threaded mounting holes
          Dimensions 0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm
          Weight 8 oz / 226 g
        • Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver
          Construction Milled aluminum (chassis) and regulation-compliant PCB
          Video Outputs SDI: 1 x BNC (75 Ohm), 3G/HD/SD
          HDMI: 1 x HDMI type A receptacle
          USB: 1 x Micro-USB 3.0 Type-B receptacle
          SDI Ancillary Data Support Supports metadata, timecode, and start/stop flags from select camera manufacturers.
          Color Sampling SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
          HDMI: RGB 4:4:4, 8-bit
          Latency <0.001 seconds (Tx to Rx without format conversion)
          Supported Resolutions 1080p: 60/59.94/50/30/29.97/25/24/23.98
          1080PsF: 30/29.97/25/24/23.98
          1080i: 60/59.94/50
          720p: 60/59.94/50
          576p: 50 (via HDMI only)
          480p: 59.94 (via HDMI only)
          576i: 50
          480i: 59.94
          Video Processing Compression
          Visually lossless

          Color Correction
          CDL/1024 1D LUT (supports 10-bit color)
          33x33x33 3D LUT (supports 10-bit color)
          Audio Compression 48 kHz, 24-bit PCM
          Audio Input Embedded
          Interfaces Switches: On/Off and Reset
          Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows
          USB Interface Functionality: Upgrade via mini-USB
          Wireless Non-DFS Frequencies
        • UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
        • EU & JP: 5.19 to 5.23 GHz

        • DFS Frequencies
        • US: 5.27 to 5.55 GHz and 5.67 GHz
        • EU & JP: 5.27 to 5.67 GHz
        • RF Power 15 dBm EIRP
          Encryption AES-128
          Range Up to 3000' / 914.4 m line of sight
          Unicast Multicast Unicast / Multicast
          Noise Rejection Can coexist with WiFi and 5 GHz cordless phones
          Power Input 2-pin connector
          7 to 28 VDC
          Power Consumption Nominal 9 W (measured at 1080p60)
          Operating Temperature 32 to 104°F / 0 to 40°C
          Mountable 1 x 1/4"-20 threaded mounting hole
          2 x M3 threaded mounting holes
          Dimensions 3.5 x 5.4 x 0.95" / 8.89 x 13.72 x 2.41 cm
          Weight 13.3 oz / 377 g
          Packaging Info
          Box Dimensions (LxWxH) 6.7 x 6.5 x 4.8"

           

              Reviews

              If you have any questions regarding this product feel free to call The Film Equipment Store where one of our experts will be happy to help. We are here for you.
              We try to ensure we are giving our customers the best advice and best value on all our products however if you do see this product cheaper else where simply tell us and we will endeavor to match the price.