Products
Matthews Floppy Cutter - 48x48" - Top Hinge (Op...
Overview Cutters are square or rectangular frames with mounting pins attache...
Overview Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Touch Fastener until needed at which time the Cutter becomes twice its original size Newly designed 90° Cutter fr...
€290 Inc VAT €357
Functions very much the same way as a Baby Plate, but its made with a heavier plate and a 1-1/8" ...
Functions very much the same way as a Baby Plate, but its made with a heavier plate and a 1-1/8" Posi-V-Lock receiver for larger lights.
€30
Matthews Matthbounce White/Black Fabric - 8x8'
This is a reversible Matthews 8x8' Matthbounce White/Black Fabric with grommets designed to be ti...
This is a reversible Matthews 8x8' Matthbounce White/Black Fabric with grommets designed to be tied to a Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (grid cloths, black silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial lig...
€210 Inc VAT €258
Matthews Matthellini Clamp - 2" End Jaw, Silver...
Overview Matthews MD-420110 (MD420110) Matthellini Clamp - 2-inch End Jaw. ...
Overview Matthews MD-420110 (MD420110) Matthellini Clamp - 2-inch End Jaw. This most versatile of clamps is now an industry favorite problem solver.Providing strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has a fixed jaw mounted at the base of th...
€88
Matthews Matthellini Clamp with 3" Center Jaw
Overview Matthews MD-420101 (MD420101) Matthellini Clamp - 3 Inch Ce...
Overview Matthews MD-420101 (MD420101) Matthellini Clamp - 3 Inch Center Jaw. This most versatile of clamps is now an industry favorite problem solver.Providing strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has a fixed jaw mounted at the ...
€72 – €72 (2 variants)
Matthews Matthellini Clamp with 6" End Jaw
Overview The silver-finished Matthews Matthellini Clamp with 6" End J...
Overview The silver-finished Matthews Matthellini Clamp with 6" End Jaw provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. The End Jaw has the fixed jaw mounted at the end of the threaded portion of the shaft. The threads end in a Baby (5/8") pin for mounting fixtures or other grip items. Benefits Provides strong, solid grip of round, square or rectangular tubing and many other common or irregul...
€76
The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and...
The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in all directions.
€40 Inc VAT €49
Matthews Medium Duty Kit Stand with Brake - Bla...
Overview Designed primarily for use in lighting kits, the Matthews Medium Duty ...
Overview Designed primarily for use in lighting kits, the Matthews Medium Duty Kit Stand with Brake is compact and light weight. This black finish stand employs a brake shoe system for locking off the riser tubes as opposed to pinch castings, thus permitting the use of heavier fixtures. Specification Load Capacity 20 lb / 9.1 kg Mounting Options 5/8" Stud Maximum Working Height 7.7' / 2.3 m Minimum Working Height 30" / 76.2 cm Collap...
€139
Matthews Monitor Mount for Baby (5/8") Spigot 8...
Overview The Matthews Monitor Mount is a strong, versatile and compact aluminu...
Overview The Matthews Monitor Mount is a strong, versatile and compact aluminum bracket that enables you to mount your flat-panel monitor to a light stand, C-Stand, or any other grip equipment with a 5/8" Baby pin/stud. It features a locking pan and tilt handles. With the optional 200mm Adapter Plate (#861863) it will support up to 65 lbs (29.5kg) Specification Packaging Info Package Weight 1.65 lb Box Dimensions (LxWxH) 7.0 x 5.5 ...
€230
Lights are always used in a video shoot or photo studio, and Butterfly and Overhead Rags are e...
Lights are always used in a video shoot or photo studio, and Butterfly and Overhead Rags are employed to partially or fully block light to create different lighting effects on the set. Sometimes it's required to use these rags on location and under different weather conditions, causing them to become wet from rain or snow. This small red Rag Bag from Matthews is designed to hold a Butterfly or Overhead Rag separate, keeping other rags dry, clean, safe, and secure. The bag is made from a ny...
€23 – €49 (4 variants)
Matthews T-Handle 3/8-16 Knurled
Matthews studio equipment, Male T-Handle 3/8"-16" Knurled. For sale at the Film Equipment Store I...
Matthews studio equipment, Male T-Handle 3/8"-16" Knurled. For sale at the Film Equipment Store Ireland.
€9 Inc VAT €11
Matthews The Slider Stand (3.8') 249561
Overview The Slider Stand from Matthews is a strong, wide-based stand with a low working heigh...
Overview The Slider Stand from Matthews is a strong, wide-based stand with a low working height for those using camera sliders and Speed Rail/Pipe Dolly Systems. Accessories for the stand, like the Baby Ball Head Adapter, Magic Finger, and Stand/Spud Adapter, are available separately. Specification Load Capacity 80 lb / 36.3 kg Mounting Options 1-1/8" Receiver Maximum Working Height 46" / 117 cm Minimum Working Height 24" / 61 ...
€398 Inc VAT €490
Used for cleaning equipment, alcohol wipes break down dirt and grime and are the most effective c...
Used for cleaning equipment, alcohol wipes break down dirt and grime and are the most effective cleaning solution for equipment. Not suitable for use on all types of materials.
€9 Inc VAT €11
Mini Maglite PRO LED 2AA Torch SP2P01HL
Overview The Mini Maglite PRO LED 2AA Torch SP2P01HL is amazingly bright for such a ...
Overview The Mini Maglite PRO LED 2AA Torch SP2P01HL is amazingly bright for such a compact torch, providing 272 Lumens and 163 metre beam distance from just a single LED. Complete with 2 x AA batteries and Free holster, the Mini Maglite PRO LED 2AA torch delivers great performance thanks to next-generation MAG-LED® Technology. Features: 272 Lumens 163 metre beam length 2 x AA batteries included Free Holster Specification Length: 168mm Barrell Diameter: 18mm Head Diam...
€25 Inc VAT €31
This Misfit Atom matte box kit provides compatibility with 15mm LWS support rods, offering robus...
This Misfit Atom matte box kit provides compatibility with 15mm LWS support rods, offering robust support for any pair of filters. With the matte box itself weighing 195g, this is a lightweight but essential tool for gimbals, drones or smaller rigs. Made from high-quality materials, this kit is a long-lasting and durable addition to your camera. 15mm LWS Compatibility – The rod bracket allows the Misfit Atom to be attached via 15mm LWS support rods. Lightweight – The Misfit Atom matte box...
€395 Inc VAT €486
The Misfit Atom is an ultralight 2-stage matte box, designed for filmmakers seeking portability ...
The Misfit Atom is an ultralight 2-stage matte box, designed for filmmakers seeking portability without sacrificing performance. This kit comes equipped for 19mm Studio setups, making it ideal for professionals who need a lightweight and versatile solution. 19mm Studio and 15mm LWS – The Misfit Atom Kit comes with brackets to support both 19mm Studio and 15mm LWS rod standards. Glare-Free – The Anti-Reflective Filter (ARF) Tilt Bracket allows you to prevent internal reflections by tilting...
€595 Inc VAT €732
Misfit Kick 360 Mk II 3-Stage Kit
The Misfit Kick 360 Mk II 3-Stage Kit includes our Misfit Kick 360 Mk II with a rotating filter ...
The Misfit Kick 360 Mk II 3-Stage Kit includes our Misfit Kick 360 Mk II with a rotating filter stage; along with the added Expansion Pack for an additional stage, three Filter Trays and the carbon fibre Top Flag. It allows you to fit up to three filters, two of which can be independently rotated. Lightweight and versatile, the Misfit Kick 360 Mk II can be mounted via rod-mounted or swing-away brackets, or directly to the lens with our Frame Safe Clamp Adaptors. Rotating Filter Stages – In...
€1.960 Inc VAT €2.411
The Misfit Kick Mk II 2-Stage Kit provides users with the core Misfit Kick Mk II matte box, alon...
The Misfit Kick Mk II 2-Stage Kit provides users with the core Misfit Kick Mk II matte box, along with two 4″ x 5.65″ Filter Trays and a carbon fibre Top Flag. The matte box can be configured in rod-mounted, swing-away or clip-on setups – using our range of compatible Frame Safe Clamp Adaptors and Brackets. Made from billet aluminium, the Misfit Kick Mk II matte box is lightweight, durable and dependable. Reveal Stage – Add an extra filter using our Reveal Stage system, for tool-free adjus...
€970 Inc VAT €1.193
The Misfit Kick Mk II Base Kit provides our flagship matte box, along with two filter trays for ...
The Misfit Kick Mk II Base Kit provides our flagship matte box, along with two filter trays for 4″ x 4″ or 4″ x 5.65″ filters. Using our Reveal Stage mechanism, shooters can transition from a two-stage to a three-stage matte without any tools. Made from lightweight billet aluminium, the Misfit Kick Mk II Base Kit is a lightweight matte box for filmmakers. Reveal Stage – Add an extra filter using our Reveal Stage system, for tool-free adjustment of your matte box. Spring-Loaded – The Misfi...
€830 Inc VAT €1.021