Matthews
Overview Flags are square or rectangular frames with mounting pins attached. ...
Overview Flags are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° Flag frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. Specification Fa...
€64 Inc VAT €79
Overview Matthews 24inch x 36inch Flag (p/n 169062). Newly designed 90 deg. Flag ...
Overview Matthews 24inch x 36inch Flag (p/n 169062). Newly designed 90 deg. Flag and Cutter frames will make it possible to position the instrument over the top of the set wall or to use two or more units to create a box for better light control. With this new design, there are now three square corners as opposed to the older design providing just two. In addition, the 48"x48" frames have been squared off with the removal of the mouse ears. Flags are square or rectangular fram...
€73 Inc VAT €90
MATTHEWS 259536 HALF APPLE BOX
Overview Matthews Half Apple Box - 12 inch x 4 inch x 20 inch (p/n 259536). Please n...
Overview Matthews Half Apple Box - 12 inch x 4 inch x 20 inch (p/n 259536). Please note: Only one box supplied.Apple Boxes - Use them for propping or leveling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes. A Full Apple Box is equivalent to two 1/2 Apples, four 1/4 Apples and eight 1/8 Apples (pancake).Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well k...
€108 Inc VAT €133
Overview Matthews 259537 Quarter Apple Box - 12 inch x 2 inch x 20 inch . Pl...
Overview Matthews 259537 Quarter Apple Box - 12 inch x 2 inch x 20 inch . Please note: Only one box supplied.Apple Boxes - Use them for propping or levelling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes.A Full Apple Box is equivalent to two 1/2 Apples, four 1/4 Apples and eight 1/8 Apples (pancake).Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are ...
€99 Inc VAT €122
Matthews 259538 Eighth Apple Box - 12 inch x 1 inch x 20 inch . Please note: Only one box suppli...
Matthews 259538 Eighth Apple Box - 12 inch x 1 inch x 20 inch . Please note: Only one box supplied.Apple Boxes - Use them for propping or levelling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes.A Full Apple Box is equivalent to two 1/2 Apples, four 1/4 Apples and eight 1/8 Apples (pancake).Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well known for innovation, dur...
€70 Inc VAT €86
The Matthews Safety Cable is a 1/8" x 32" wire safety cable designed to attach to hanging ligh...
The Matthews Safety Cable is a 1/8" x 32" wire safety cable designed to attach to hanging lighting fixtures. 1/8" x 32" wire safety cable.
€14 Inc VAT €17
Matthews Apple Box - Full - 20 x 12 x 8" (51 x ...
Overview Matthews Full Apple Box - 12 inch x 8 inch x 20 inch (p/n 259535). Please note:...
Overview Matthews Full Apple Box - 12 inch x 8 inch x 20 inch (p/n 259535). Please note: Only one box supplied.Apple Boxes - Use them for propping or levelling, sitting or standing. Nail Wall Plates to them to hold low angle lighting fixtures and multiple other purposes. A Full Apple Box is equivalent to two 1/2 Apples, four 1/4 Apples and eight 1/8 Apples (pancake). Matthews Studio Equipment is the original “Hollywood” grip supplier to the film and video industries they are well kno...
€120 Inc VAT €148
Matthews Baby Ballhead Adapter 415173
Overview Matthews has created the handy Baby Ball Head Adapter to allow you to mount any ball ...
Overview Matthews has created the handy Baby Ball Head Adapter to allow you to mount any ball head with a threaded 3/8" tap to any piece of baby 5/8" or junior 1 1/8" hardware such as light stands or clamps with studs. The adapter is made of strong 6061 T-6 aluminum and features a large ergonomic handle. Specification Material Aluminum Compatibility 5/8" (16 mm) or 1 1/8" (28.57 mm) stud Weight 0.5 lb (0.23 kg) Packaging I...
€45 Inc VAT €55
Matthews Baby Pin Adapter 5/8" Female to 1/4-20...
Overview This Matthews Baby Pin Adapter is used to allow devices with a 1/4"-2...
Overview This Matthews Baby Pin Adapter is used to allow devices with a 1/4"-20 female thread to be mounted onto anything with a 5/8" Baby Pin. The Baby Pin is commonly used in the motion picture industry and can be found on everything including stands, rods, clips, clamps, and more. Product Highlights Adapts 5/8" Stud to 1/4"-20 Male Thread Specification Material Aluminum Attachment Size 5/8" female Baby Pin receiver to 1/4"-20 male Packa...
€18 Inc VAT €22
This piece of equipment has almost as many names as it has uses. Originally designed for mounting...
This piece of equipment has almost as many names as it has uses. Originally designed for mounting Baby fixtures to the top of set walls, they are also used as the world's lowest stand, nailing to a floor or on an Apple Box. Other names include Baby Nail On, 750 Pigeon, or just Nail On Plate. Matthews manufactures Baby Plates in 3", 6" and 12" straight and a 12" Right Angle
€30 Inc VAT €37
Matthews C-Stand MD-B756040 Grip Head Kit (Blac...
Overview The black Matthews C-Stand Grip Head Kit consists of a double riser sliding-...
Overview The black Matthews C-Stand Grip Head Kit consists of a double riser sliding-leg C-Stand, a grip head, and a 40" arm. The stand rises to a maximum height of 10.5'. The unique staggered leg design of a C-Stand allows it to be nested and placed extremely close to one another on a set. The top leg of the stand is independently adjustable. Independent sliding top leg adjustment for leveling on uneven terrain Grip head and arm allow for mounting and placement of gobos, sm...
€315 Inc VAT €387
Matthews Century C+ Stand with Turtle Base and ...
Overview This Matthews Century C+ Stand with Turtle Base and Grip Arm Kit consists of a 40" th...
Overview This Matthews Century C+ Stand with Turtle Base and Grip Arm Kit consists of a 40" three-section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip head, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag. The unique staggered leg design of the C-Stand allows it to be nested and placed extremely close to one another on a set. Century C+ Stand with Removable Turtle Base (10.5') The Century C+ Stand with Removable Turtle...
€345 Inc VAT €424
Matthews Extendellini For Matthellini Center Ja...
The Matthews Extendellini For Matthellini Center Jaw Clamp is an ingenious accessory that allo...
The Matthews Extendellini For Matthellini Center Jaw Clamp is an ingenious accessory that allows you to extend the grip of any Matthellini center jaw clamp by up to 10" (25.4 cm). Just remove the removable jaw from the Matthellini clamp, thread the end of the Extendellini into the end of the pin on the Matthellini, replace the jaw, and the reach of the jaw has increased by 10". It's also possible to add another Extendellini (not included), for a total addition to the reach of the clamp of ...
€45 Inc VAT €55
Matthews Floppy Cutter - 48x48" - Top Hinge (Op...
Overview Cutters are square or rectangular frames with mounting pins attache...
Overview Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Touch Fastener until needed at which time the Cutter becomes twice its original size Newly designed 90° Cutter fr...
€290 Inc VAT €357
Functions very much the same way as a Baby Plate, but its made with a heavier plate and a 1-1/8" ...
Functions very much the same way as a Baby Plate, but its made with a heavier plate and a 1-1/8" Posi-V-Lock receiver for larger lights.
€30
Matthews Matthbounce White/Black Fabric - 8x8'
This is a reversible Matthews 8x8' Matthbounce White/Black Fabric with grommets designed to be ti...
This is a reversible Matthews 8x8' Matthbounce White/Black Fabric with grommets designed to be tied to a Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (grid cloths, black silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial lig...
€210 Inc VAT €258
Matthews Matthellini Clamp - 2" End Jaw, Silver...
Overview Matthews MD-420110 (MD420110) Matthellini Clamp - 2-inch End Jaw. ...
Overview Matthews MD-420110 (MD420110) Matthellini Clamp - 2-inch End Jaw. This most versatile of clamps is now an industry favorite problem solver.Providing strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has a fixed jaw mounted at the base of th...
€88
Matthews Matthellini Clamp with 3" Center Jaw
Overview Matthews MD-420101 (MD420101) Matthellini Clamp - 3 Inch Ce...
Overview Matthews MD-420101 (MD420101) Matthellini Clamp - 3 Inch Center Jaw. This most versatile of clamps is now an industry favorite problem solver.Providing strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has a fixed jaw mounted at the ...
€72 – €72 (2 variants)
Matthews Matthellini Clamp with 6" End Jaw
Overview The silver-finished Matthews Matthellini Clamp with 6" End J...
Overview The silver-finished Matthews Matthellini Clamp with 6" End Jaw provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. The End Jaw has the fixed jaw mounted at the end of the threaded portion of the shaft. The threads end in a Baby (5/8") pin for mounting fixtures or other grip items. Benefits Provides strong, solid grip of round, square or rectangular tubing and many other common or irregul...
€76
The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and...
The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in all directions.
€40 Inc VAT €49