Grip & Power
Matthews Baby Pin Adapter 5/8" Female to 1/4-20...
Overview This Matthews Baby Pin Adapter is used to allow devices with a 1/4"-2...
Overview This Matthews Baby Pin Adapter is used to allow devices with a 1/4"-20 female thread to be mounted onto anything with a 5/8" Baby Pin. The Baby Pin is commonly used in the motion picture industry and can be found on everything including stands, rods, clips, clamps, and more. Product Highlights Adapts 5/8" Stud to 1/4"-20 Male Thread Specification Material Aluminum Attachment Size 5/8" female Baby Pin receiver to 1/4"-20 male Packa...
€18 Inc VAT €22
Matthews C-Stand MD-B756040 Grip Head Kit (Blac...
Overview The black Matthews C-Stand Grip Head Kit consists of a double riser sliding-...
Overview The black Matthews C-Stand Grip Head Kit consists of a double riser sliding-leg C-Stand, a grip head, and a 40" arm. The stand rises to a maximum height of 10.5'. The unique staggered leg design of a C-Stand allows it to be nested and placed extremely close to one another on a set. The top leg of the stand is independently adjustable. Independent sliding top leg adjustment for leveling on uneven terrain Grip head and arm allow for mounting and placement of gobos, sm...
€315 Inc VAT €387
Matthews Century C+ Stand with Turtle Base and ...
Overview This Matthews Century C+ Stand with Turtle Base and Grip Arm Kit consists of a 40" th...
Overview This Matthews Century C+ Stand with Turtle Base and Grip Arm Kit consists of a 40" three-section upright with two risers. It includes a removable turtle base, a 2.5" swivel grip head, and a 40" Hollywood Arm that can hold a small light fixture, gobo, or flag. The unique staggered leg design of the C-Stand allows it to be nested and placed extremely close to one another on a set. Century C+ Stand with Removable Turtle Base (10.5') The Century C+ Stand with Removable Turtle...
€345 Inc VAT €424
Matthews Extendellini For Matthellini Center Ja...
The Matthews Extendellini For Matthellini Center Jaw Clamp is an ingenious accessory that allo...
The Matthews Extendellini For Matthellini Center Jaw Clamp is an ingenious accessory that allows you to extend the grip of any Matthellini center jaw clamp by up to 10" (25.4 cm). Just remove the removable jaw from the Matthellini clamp, thread the end of the Extendellini into the end of the pin on the Matthellini, replace the jaw, and the reach of the jaw has increased by 10". It's also possible to add another Extendellini (not included), for a total addition to the reach of the clamp of ...
€45 Inc VAT €55
Matthews Floppy Cutter - 48x48" - Top Hinge (Op...
Overview Cutters are square or rectangular frames with mounting pins attache...
Overview Cutters are square or rectangular frames with mounting pins attached. Used to control natural or artificial light. Can be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Floppies are Cutters which have an extra layer of material sewn to one edge and held in place with Touch Fastener until needed at which time the Cutter becomes twice its original size Newly designed 90° Cutter fr...
€290 Inc VAT €357
Matthews Matthbounce White/Black Fabric - 8x8'
This is a reversible Matthews 8x8' Matthbounce White/Black Fabric with grommets designed to be ti...
This is a reversible Matthews 8x8' Matthbounce White/Black Fabric with grommets designed to be tied to a Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (grid cloths, black silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial lig...
€210 Inc VAT €258
Matthews Matthellini Clamp - 2" End Jaw, Silver...
Overview Matthews MD-420110 (MD420110) Matthellini Clamp - 2-inch End Jaw. ...
Overview Matthews MD-420110 (MD420110) Matthellini Clamp - 2-inch End Jaw. This most versatile of clamps is now an industry favorite problem solver.Providing strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has a fixed jaw mounted at the base of th...
€88
Matthews Matthellini Clamp with 3" Center Jaw
Overview Matthews MD-420101 (MD420101) Matthellini Clamp - 3 Inch Ce...
Overview Matthews MD-420101 (MD420101) Matthellini Clamp - 3 Inch Center Jaw. This most versatile of clamps is now an industry favorite problem solver.Providing strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle design and reinforced jaws, and the shaft is 1010 chrome plated steel. Available with 2" or 3" Center Jaw and 2" or 6" End Jaw. The Center Jaw has a fixed jaw mounted at the ...
€72 – €72 (2 variants)
Matthews Matthellini Clamp with 6" End Jaw
Overview The silver-finished Matthews Matthellini Clamp with 6" End J...
Overview The silver-finished Matthews Matthellini Clamp with 6" End Jaw provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. The End Jaw has the fixed jaw mounted at the end of the threaded portion of the shaft. The threads end in a Baby (5/8") pin for mounting fixtures or other grip items. Benefits Provides strong, solid grip of round, square or rectangular tubing and many other common or irregul...
€76
The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and...
The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" & 5/8", eliminating confusion. New castings offer positive lock in all directions.
€40 Inc VAT €49
Matthews Medium Duty Kit Stand with Brake - Bla...
Overview Designed primarily for use in lighting kits, the Matthews Medium Duty ...
Overview Designed primarily for use in lighting kits, the Matthews Medium Duty Kit Stand with Brake is compact and light weight. This black finish stand employs a brake shoe system for locking off the riser tubes as opposed to pinch castings, thus permitting the use of heavier fixtures. Specification Load Capacity 20 lb / 9.1 kg Mounting Options 5/8" Stud Maximum Working Height 7.7' / 2.3 m Minimum Working Height 30" / 76.2 cm Collap...
€139
Matthews Monitor Mount for Baby (5/8") Spigot 8...
Overview The Matthews Monitor Mount is a strong, versatile and compact aluminu...
Overview The Matthews Monitor Mount is a strong, versatile and compact aluminum bracket that enables you to mount your flat-panel monitor to a light stand, C-Stand, or any other grip equipment with a 5/8" Baby pin/stud. It features a locking pan and tilt handles. With the optional 200mm Adapter Plate (#861863) it will support up to 65 lbs (29.5kg) Specification Packaging Info Package Weight 1.65 lb Box Dimensions (LxWxH) 7.0 x 5.5 ...
€230
Lights are always used in a video shoot or photo studio, and Butterfly and Overhead Rags are e...
Lights are always used in a video shoot or photo studio, and Butterfly and Overhead Rags are employed to partially or fully block light to create different lighting effects on the set. Sometimes it's required to use these rags on location and under different weather conditions, causing them to become wet from rain or snow. This small red Rag Bag from Matthews is designed to hold a Butterfly or Overhead Rag separate, keeping other rags dry, clean, safe, and secure. The bag is made from a ny...
€23 – €49 (4 variants)
Matthews The Slider Stand (3.8') 249561
Overview The Slider Stand from Matthews is a strong, wide-based stand with a low working heigh...
Overview The Slider Stand from Matthews is a strong, wide-based stand with a low working height for those using camera sliders and Speed Rail/Pipe Dolly Systems. Accessories for the stand, like the Baby Ball Head Adapter, Magic Finger, and Stand/Spud Adapter, are available separately. Specification Load Capacity 80 lb / 36.3 kg Mounting Options 1-1/8" Receiver Maximum Working Height 46" / 117 cm Minimum Working Height 24" / 61 ...
€398 Inc VAT €490
Opinel N°08 Carbon Pocket Knife
Overview Opinel N°08 Carbon Pocket Knife The flagship size of the collection! 8.5cm Blade version...
Overview Opinel N°08 Carbon Pocket Knife The flagship size of the collection! 8.5cm Blade version Opinel No8 is the most sold and versatile size in the ever growing line of Opinel folding knives. This knife is small enough to be used as a pocket knife. Material: Knife Our carbon steel is extremely hard, thereby guaranteeing excellent cutting quality, good wear resistance and easy regrinding. Carbon can corrode easily. We advise you to avoid damp locations and to wipe and grease the blade af...
€12 Inc VAT €15
PortaBrace CAR-1CAM Cargo Case for Compact HDSL...
Overview FEATURES -Abrasion-resistant Cordura material -Semi-rigid, padded, lightweight frame ...
Overview FEATURES -Abrasion-resistant Cordura material -Semi-rigid, padded, lightweight frame -Comfortable shoulder strap included -Waterproof, anti-skid bottom -Quick-zip, easy-access lid The black Cargo Case Camera Edition (CAR-1CAM) holds a small compact HD or DSLR camera setup. For storing more gear, the bag features two exterior padded side pockets, two front and back exterior flat zippered pockets, and two front and back interior slip pockets. It has a "quick-zip" lid for fas...
€168 Inc VAT €207
PortaBrace LPB-ASTRA Light Pack for Litepanels ...
Overview Product Highlights Custom Fit for LED Light Panel 1000D Cordura Nylon Semi-Rigid 1.5"...
Overview Product Highlights Custom Fit for LED Light Panel 1000D Cordura Nylon Semi-Rigid 1.5" Thick Foam Zippered Interior Pocket for Gel Frames Padded Exterior Pocket for Accessories Two Side Pockets Unzips on Three Sides and Opens Flat Two Interior Tie-Down Straps Two Suede-Leather Handles Padded Suede-Leather Shoulder Strap Constructed out of lightweight 1000D Cordura nylon, this black Light Pack from Porta Brace is a lightweight, yet durable option for transporting a Litepane...
€245 Inc VAT €301
Ready Rig GS Stabilizer + ProArm Kit with Case
Overview Product Highlights Load Capacity Range of 1-40 lb Vertical Axis Stabilization Telesco...
Overview Product Highlights Load Capacity Range of 1-40 lb Vertical Axis Stabilization Telescoping Carbon Fiber Support Arms 55" Boom Range Compatible with Any Gimbal Operate Gimbal Over- or Underslung Aluminum & Carbon Fiber Construction Slim, Compact Design Soft Carrying Case Included Use the Ready Rig GS Stabilizer + ProArm Kit to transfer the weight of a gimbal-mounted camera away from an operator's arms and shoulders. By redistributing the load to the user's hips and cor...
€2.600 Inc VAT €3.198