Studio & Lighting
Angler Quick-Open Deep Parabolic Softbox (36")
Ideal for portrait, product, and fashion photography and more, the redesigned Angler Quick-Ope...
Ideal for portrait, product, and fashion photography and more, the redesigned Angler Quick-Open Deep Parabolic 36" Softbox features integrated locking rods that quickly lift and snap into place so you're ready to shoot in a fraction of the time it takes to set up a conventional softbox. The softbox has an improved release mechanism that employs easy-to-push levers that close the softbox easily in seconds. While the 16-sided shape of the softbox imparts a wrap-around light quality, its dept...
€154 Inc VAT €189
Matthews Extendellini For Matthellini Center Ja...
The Matthews Extendellini For Matthellini Center Jaw Clamp is an ingenious accessory that allo...
The Matthews Extendellini For Matthellini Center Jaw Clamp is an ingenious accessory that allows you to extend the grip of any Matthellini center jaw clamp by up to 10" (25.4 cm). Just remove the removable jaw from the Matthellini clamp, thread the end of the Extendellini into the end of the pin on the Matthellini, replace the jaw, and the reach of the jaw has increased by 10". It's also possible to add another Extendellini (not included), for a total addition to the reach of the clamp of ...
€45 Inc VAT €55
This Center Clamp by Cardellini can grip round, square, and rectangular tubing up to 2" in diamet...
This Center Clamp by Cardellini can grip round, square, and rectangular tubing up to 2" in diameter, and it is gentle enough to hold brittle objects like mirrors, glass, or fragile props. Use it to mount lights on pipes, set walls, pieces of lumber, car rigs, drop ceilings, and more. A set of quick-spin knobs makes it faster and easier to set and release this clamp, and it features replaceable rubber pads on the inside of its 3" jaws that assist with grip and protect surfaces from scratches. ...
€80 Inc VAT €98
The Avenger D200 2.5" Grip Head is designed to hold grip arms, scrims, flags, etc. The head has a...
The Avenger D200 2.5" Grip Head is designed to hold grip arms, scrims, flags, etc. The head has a non-slip T-Top rubber grip handle cover to give you a firm grasp on it. It has a 5/8" Baby receiver for light stands and an automotive-quality brake pad for a secure hold on accessories.
€45 Inc VAT €55
Impact Empty Saddle Sandbag (18 lb)
Stabilize your light stands, boom arms, backgrounds, and more with the Impact Orange Empty 18 lb ...
Stabilize your light stands, boom arms, backgrounds, and more with the Impact Orange Empty 18 lb Capacity Saddle Sandbag. Easily transport the empty saddlebag to your location where it can be filled with available sand, dirt, or rocks and securely zipped shut. When your shoot is over, simply empty the contents to make your load lighter for the commute back home. Weather- and water-resistant cordura fabric stands up to the elements and use over time, while the double-zipper design provides an ...
€30
Westcott X-Drop Kit (5 x 12', Green Screen)
Westcott X-Drop Overview This X-Drop Kit from Westcott allows you to set up your backdrop a...
Westcott X-Drop Overview This X-Drop Kit from Westcott allows you to set up your backdrop anywhere you want, removing the need for wall hooks or other kinds of support. Inside the package is a 5 x 12' X-Drop green screen backdrop, an expandable X-drop frame, and a travel case. The arms and the legs of the X-Drop frame feature small hooks that fit through the grommets to stretch the fabric and avoid wrinkles. The included backdrop is made of a wrinkle-resistant cotton blend that is desig...
€154 Inc VAT €189
Westcott 5-in-1 Reflector Disc - 40.5" (1 m)
Westcott 5-in-1 Reflector Disc - 40.5" (1 m) - 301 Key...
Westcott 5-in-1 Reflector Disc - 40.5" (1 m) - 301 Key Features Collapsible Gold/Silver/White/Black/Translucent Westcott 301 Overview Westcott Lighting Educational - Reflectors The Westcott 40.5" 5-in-1 Collapsible Reflector is versatile in the field and in the studio, providing shadow-lightening detail in your subject, using available, or studio lighting. It starts out as a translucent white disc -- perfect for softe...
€45 Inc VAT €55
Westcott 4x4' Scrim Jim Cine Kit
Westcott 4x4' Scrim Jim Cine Kit - 1891-N Key Features Bounce or D...
Westcott 4x4' Scrim Jim Cine Kit - 1891-N Key Features Bounce or Diffuse Any Light Source 4x4' 3/4-Stop Diffuser 4x4' Silver/White Bounce Fabric 4x4' Modular Anodized Aluminum Frame Have everything you need to bounce or diffuse any kind of light with the 4x4' Scrim Jim Cine Kit from Westcott. This easy-to-use kit is designed to prepare you for the unexpected when on set. Featuring a 4x4' Scrim Jim Cine modular anodized aluminum frame, positive-locki...
€369 Inc VAT €454
Manfrotto 118 Universal Short Spigot with Doubl...
Overview This is a Manfrotto 118 Universal Short Spigot with Double Male Thread. It fits the (29...
Overview This is a Manfrotto 118 Universal Short Spigot with Double Male Thread. It fits the (2905) Swivel Umbrella Adapter. 5/8" diameter with 1/4-20 and 3/8" threaded tip. Specification Mounting 1/4"-20 Male, 5/8" / 16 mm Stud (Connector 1)3/8"-16 Male, 5/8" / 16 mm Stud (Connector 2) Packaging Info Package Weight 0.05 lb Box Dimensions (LxWxH) 1.5 x 0.5 x 0.5" "
€11 Inc VAT €14
Manfrotto 036-38 Standard Stud with 3/8" Screw ...
Overview The Mafrotto 036-38 Standard Stud with 3/8" Screw snaps into a Super Clamp socket. It h...
Overview The Mafrotto 036-38 Standard Stud with 3/8" Screw snaps into a Super Clamp socket. It has a 3/8" screw thread at its other end. Use it directly with equipment that features a 3/8" socket, or with a camera head. Specification Mounting 3/8"-16 Male (Connector 1)5/8" / 16 mm Hex Stud (Connector 2) Packaging Info Package Weight 0.13 lb Box Dimensions (LxWxH) 2.5 x 0.5 x 0.5"
€11 Inc VAT €14
Canare EC01-B 3pin XLR Audio Cable (1.0m)
Overview Canare EC01-B 3pin XLR Audio Cable (1.0m) Product Highlights Neutrik XLR-3 Connectors ...
Overview Canare EC01-B 3pin XLR Audio Cable (1.0m) Product Highlights Neutrik XLR-3 Connectors L-4E6S Cable Matte Finish Jacket Black Made in Japan to the highest industry standards The Canare EC01-B 1.0 meter Audio Cable is a cable assembly with a high-density, copper braid-shielded L-4E6S cable, and NC3FX-B (female) and NC3MX-B (male) Neutrik XLR-3 connectors featuring black chrome shells with gold-plated contact pins. This audio cord rejects EMI, RFI, and handling noise, and exhibits go...
€22
Canare EC003-B 3pin XLR Audio Cable (0.3m)
Overview Canare EC003-B 3pin XLR Audio Cable (0.3m) Product Highlights Neutrik XLR-3 Connectors...
Overview Canare EC003-B 3pin XLR Audio Cable (0.3m) Product Highlights Neutrik XLR-3 Connectors L-4E6S Cable Matte Finish Jacket Black Made in Japan to the highest industry standards The Canare EC003-B 0.3 meter Audio Cable is a cable assembly with a high-density, copper braid-shielded L-4E6S cable, and NC3FX-B (female) and NC3MX-B (male) Neutrik XLR-3 connectors featuring black chrome shells with gold-plated contact pins. This audio cord rejects EMI, RFI, and handling noise, and exhibits ...
€20
Matthews Baby Pin Adapter 5/8" Female to 1/4-20...
Overview This Matthews Baby Pin Adapter is used to allow devices with a 1/4"-2...
Overview This Matthews Baby Pin Adapter is used to allow devices with a 1/4"-20 female thread to be mounted onto anything with a 5/8" Baby Pin. The Baby Pin is commonly used in the motion picture industry and can be found on everything including stands, rods, clips, clamps, and more. Product Highlights Adapts 5/8" Stud to 1/4"-20 Male Thread Specification Material Aluminum Attachment Size 5/8" female Baby Pin receiver to 1/4"-20 male Packa...
€18 Inc VAT €22
Matthews Medium Duty Kit Stand with Brake - Bla...
Overview Designed primarily for use in lighting kits, the Matthews Medium Duty ...
Overview Designed primarily for use in lighting kits, the Matthews Medium Duty Kit Stand with Brake is compact and light weight. This black finish stand employs a brake shoe system for locking off the riser tubes as opposed to pinch castings, thus permitting the use of heavier fixtures. Specification Load Capacity 20 lb / 9.1 kg Mounting Options 5/8" Stud Maximum Working Height 7.7' / 2.3 m Minimum Working Height 30" / 76.2 cm Collap...
€139
Matt Black Cinefoil - 300mm x 15.15m
Matt Black Cinefoil is made from a non-reflective aluminum material that virtually "soaks up" li...
Matt Black Cinefoil is made from a non-reflective aluminum material that virtually "soaks up" light. Ideal for masking light leaks and/or eliminating unwanted reflections, it can be quickly shaped to form barndoors, flags, and other configurations. Lightweight, yet durable, Cinefoil can be quickly positioned in place with tape, staples or adhesives. Sizes Available 300mm x 15.15m
€40 Inc VAT €49
Aputure STORM 80c BLAIR-CG LED Monolight | Film...
* We can supply the full range of Aputure products and will price match - Please contact us at ...
* We can supply the full range of Aputure products and will price match - Please contact us at sales@filmequipmentstore.com * Aputure STORM 80c Overview Key Features Compact, Portable Film/TV Light Fixture Output: 19,850 Lux at 3.3' w/ Reflector 1800-20,000K CCT; BLAIR-CG Color Control 80W Color-Tunable Point-Source Unit Onboard, DMX, Sidus & App Control AC Adapter & USB-C 100W Input Options Optional V-Mount Battery Plate SSI (D56) 88 | SSI (Tungsten) 84 4 Dimming Curves M...
€550 Inc VAT €677
Aputure STORM 1000c BLAIR-CG LED | Film Equip...
Aputure STORM 1000c Overview Color-Tunable Point Source Fixture Expanding Aputure's line...
Aputure STORM 1000c Overview Color-Tunable Point Source Fixture Expanding Aputure's line of BLAIR-CG LED chipset lights, the STORM 1000c BLAIR-CG LED Monolight with Wide Reflector is a versatile point-source workhorse offering exceptional brightness while maintaining extremely high color accuracy. It pairs a powerful and innovative full-spectrum chipset with advanced white-point control, professional color accuracy, a secure ProLock accessory mount, and robust, IP65-rated constructio...
€3.695 Inc VAT €4.545
Manfrotto Alu Mini Compact Air-Cushioned Stand ...
This is the black, 7' Manfrotto Alu Mini Compact Air-Cushioned Stand . With a patented Quick S...
This is the black, 7' Manfrotto Alu Mini Compact Air-Cushioned Stand . With a patented Quick Stack System (QSS), ease of transport is optimized. Connecting the stands together saves a lot of room while storing them in the studio or in a location case. This is an updated version of the "Stacker" stand. Lightweight Location Stand Rises to a maximum height of 7' (2.1 m) Can hold up to 8.8 lb (4 kg) Air-Cushioned Prevents damage to equipment or injury to fingers if you f...
€105 Inc VAT €129
Matthews Matthbounce White/Black Fabric - 8x8'
This is a reversible Matthews 8x8' Matthbounce White/Black Fabric with grommets designed to be ti...
This is a reversible Matthews 8x8' Matthbounce White/Black Fabric with grommets designed to be tied to a Butterfly/Overhead frame. For many years, only the basic materials were used such as scrims to reduce light, silk to diffuse light and solid to eliminate light. More recently many new materials have been added to allow many degrees of diffusion (grid cloths, black silks, etc.) plus many new reflective materials are now available to make large reflectors for both sunlight and artificial lig...
€210 Inc VAT €258
BlackTak™ Light Masking Foil - 50mm x 25m (self...
Temperature resistant, self-adhesive foil Helps control light spills in professional TV, movie a...
Temperature resistant, self-adhesive foil Helps control light spills in professional TV, movie and theatre production Temperature resistant up to 180°c*** Self-adhesive Flexible Conformable Easy to tear Backing liner for easy application Block out light spillsTake control of light spills with BlackTak™ Light Masking Foil. A self-adhesive, heat-resistant foil, capable of resisting temperatures up to 180°c once applied***. Designed specifically for use in the professional TV, theatre and movi...
€30 Inc VAT €37